Radium: Fuel Rails, VW/Audi/Bentley 6.0L W12
COMPATIBILITY
02-10 Audi A8L W12
03-18 Bentley Continental GT
06-18 Bentley Continental GTC
05-13 Bentley Continental Flying Spur
09-11 Bentley Supersports
02-11 VW Phaeton W12
OVERVIEW
Each Radium Engineering fuel rail is manufactured with dual 3/8" (6AN) internal bores that internally connect to all 12 injectors. Combined, these dual bores are 12% larger than a single 1/2" (8AN) bore.
The Radium Engineering fuel rails are manufactured with dual 3/8" (6AN) internal bores that internally connect to all injectors. Combined, these dual bores are 12% larger than a single 1/2" (8AN) bore. This system can support all necessary engine power requirements and is compatible with all alternative fuels.
FEATURES
Lightweight aluminum construction
Single 8AN ORB ports at both ends of each fuel rail
12% larger internal flow diameter than 8AN
Anodized finish for wear and corrosion resistance
No special tools required for installation
FUEL INJECTOR COMPATIBILITY
Like the OEM fuel rails, the injector bores are 14mm ID so factory injectors (or any equivalent aftermarket injector) can be used. Aftermarket injectors must match the OEM height and O-ring dimensions. Radium does not make injector recommendations other than "OEM equivalent".
INCLUDES
Billet 6.0L W12 Fuel Rails (x2)
Preassembled O-ring Sealed End Caps (x4)
M6x1mm Stainless Steel Hardware (x6)
PORTS AND FITTINGS
The O-ring sealed billet end cap ports are 3/4"-16 thread tapped compatible with 8AN ORB fittings.
Appropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.
Stock Images Used. Actual Product May Vary.